Ankersmid heated line series AHLH2004-PA

Ankersmid heated line series AHLH2004-PAAHLH2004

For high temperatures

up to 200°C

 

Interchangeable PTFE-tube

(6x1 , 8x1  or 10x1 mm)

 

Application

This electrical heated AHLH2004-PA sample tube is designed to be connected to all Ankersmid sample elements. They are used to keep the necessary gas components above their ACID-dew point, and avoid condensation.

This is a safe way to transport the sample to a heated analyser or the special Ankersmid coolers.

 

Description

Interchangeable sample tube out of PTFE in a second PTFE-tube.

These AHLH2004-PA heated lines are manufactured according to the clients needs and completely confectioned in the factory at a fixed length.

The sample line is standard equipped with a PT100 for temperature control. The heater used in this type is ONE serial resistance, twisted around the tube. Due to this construction we can not have cold zones or spots, where a potential blockage can occur.

Flexible isolation out of multi-layer glass wool.

A variety of standard lines is available but many options can be supplied as well.

Ready-to-use with multi-pole connector.

 

See our code page Chpt. 2.1.1 for all versions.

 

·               Completely manufactured “ready-to-use”

·               ONE serial heater

·               Never cold spots

·               Tube 6x1 , 8x1 or 10x1 mm

·               Integrated PT100 (other sensors on request)

·               External temperature controller required

·               PTFE-tube interchangeable

ATEX-approval available (see AHLX)

 

 

Schematic picture

 

Free wires

 

L        Total length

DA      Outside diameter of inner tube

DK      Silicon end connection outside diameter

DM     Corrugated tube outside diameter

LA      Length of connection stud

LK      Length of silicon end connection

LL       Length of cable connection

 

DN

6x1

8x1

10x1

DA

6 mm

8 mm

10 mm

DK

48 mm

DM

42.5 mm

LA

25 mm

LK

105 mm

LD

62 mm

LE

35 mm

Min. bending radius

200 mm

Dimension and minimum bending radius (tolerance: length: 2%, diameter: 5%)

 

 

 

 

 

 

 

 

 

 

 

 

Maximum operating temperatures and power consumption

 

Tmax

Sample tube

6x1 mm

8x1 mm

10x1 mm

200°C

Fixed

100 W/m

100 W/m

100 W/m

200°C

Interchangeable

100 W/m

125 W/m

125 W/m

(Tolerance on power: 10% between -20°C and +40°C)

 

 

Maximum available lengths for power connection 230VAC and 115VAC

 

Tmax

Power

6x1 mm

8x1 mm

10x1 mm

200°C

230VAC

52

52

52

200°C

115VAC

25

25

25

(Tolerance in length: 2%)

 

 

 

Sample line

version

Power

supply

Outer

diameter

Description

code

Length code x (meter)

Beginning and end fitting (1x)

PTFE-tube

fixed

Max. 200°C

230VAC

6 mm

AHLH2003-PA06-230P

AHL030

AHL300

230VAC

8 mm

AHLH2003-PA08-230P

AHL031

AHL301

230VAC

10 mm

AHLH2003-PA10-230P

AHL032

AHL302

PTFE-tube interchangeable

Max. 200°C

230VAC

6 mm

AHLH2004-PA06-230P

AHL033

AHL303

230VAC

8 mm

AHLH2004-PA08-230P

AHL034

AHL304

230VAC

10 mm

AHLH2004-PA10-230P

AHL035

AHL305

PTFE-tube

fixed

Max. 200°C

115VAC

6 mm

AHLH2003-PA06-115P

AHL036

AHL306

115VAC

8 mm

AHLH2003-PA08-115P

AHL037

AHL307

115VAC

10 mm

AHLH2003-PA10-115P

AHL038

AHL308

PTFE-tube interchangeable

Max. 200°C

115VAC

6 mm

AHLH2004-PA06-115P

AHL039

AHL309

115VAC

8 mm

AHLH2004-PA08-115P

AHL040

AHL400

115VAC

10 mm

AHLH2004-PA10-115P

AHL041

AHL401

Ankersmid purchase codes (extraction, see code page Chapter 2.1.1 for all available versions)

 

Example:               AHLH2004-PA06-230P

Coding:

AHL:                         Ankersmid Sampling, Heated Line

H:                       High temperature version

200:                    Maximum regulated set-point 200°C

4:                       Interchangeable PTFE-tube with SS stud

PA:                      Outer PA-jacked corrugated and thermal fleece insulation

06:                      Outside tube diameter 6mm

230:                    Supply 230VAC

E:                       PT100 2-wire version

 

 

 

Ankersmid M&C bvba,         Neerlandweg 21, B-2610 Wilrijk,        :  info@ankersmid-mc.be,  : (32) - 3/820 80 01,