Ankersmid heated lines series AHLM0xx1-PA

AHLL0xx1Ankersmid heated lines series AHLM0xx1-PA

For lower temperatures

30°C - 120°C

 

Interchangeable PTFE-tube

(6x1, 8x1 or 10x1 mm)

 

Application

This electrical heated AHLM sample tube is designed for connecting to all Ankersmid sample elements. They are used to keep the necessary gas components above their dew point, and avoid condensation.

This is a safe way to transport the sample to a heated analyser or the special Ankersmid coolers.

 

 Description

These AHLM heated lines are manufactured according to the clients needs and completely confectioned in the factory at a fixed length.

The heater used in this type is an auto-regulated ribbon, close to the tube. Due to this construction there are no cold zones or spots, where a potential blockage can occur.

A variety of standard lines is available but many options can be supplied as well.

 

See our code page Chpt. 2.1.1 for all versions.

 

·               Completely manufactured “ready-to-use”

·               ONE auto-regulated ribbon heater

·               Never cold spots

·               Tube 4/6, 6/8 or 8/10 mm

·               PTFE-tube interchangeable

ATEX-approval available (see AHLX)

 

 

Schematic picture

 

 

Free wires

 

L        Total length

DA      Outside diameter of inner tube

DK      Silicon end connection outside diameter

DM     Corrugated tube outside diameter

LA      Length of connection stud

LK      Length of silicon end connection

LL       Length of cable connection

 


DN

6x1

8x1

10x1

DA

6 mm

8 mm

10 mm

DK

48 mm

DM

42.5 mm

LA

25 mm

LK

105 mm

LD

62 mm

LE

35 mm

Min. bending radius

200 mm

 

 

 

 

 

 

 

 

 

 

Dimension and minimum bending radius (tolerance: length: 2%, diameter: 5%)


 

 

Ankersmid purchase codes (extraction, see code page Chapter 2.1.1 for all available versions)

 

Sample line

version

Power

supply

Outer

diameter

Description

code

Length code x (meter)

Beginning and end fitting (1x)

PTFE-tube

Fixed

All temperatures

230VAC

6 mm

AHLM0xx0-PA06-230X

AHL010

AHL100

230VAC

8 mm

AHLM0xx0-PA08-230X

AHL011

AHL101

230VAC

10 mm

AHLM0xx0-PA10-230X

AHL012

AHL102

PTFE-tube Interchangeable

All temperatures

230VAC

6 mm

AHLM0xx1-PA06-230X

AHL016

AHL106

230VAC

8 mm

AHLM0xx1-PA08-230X

AHL017

AHL107

230VAC

10 mm

AHLM0xx1-PA10-230X

AHL018

AHL108

 

xx      is to be defined in the power consumption/temperature needed:

 

10         10W/m =   40°C @ 20°C ambient

15      15W/m =   45°C @ 20°C ambient

25      25W/m =   80°C @ 20°C ambient 

45      45W/m = 100°C @ 20°C ambient

60      60W/m = 120°C @ 20°C ambient

 

 

Example:     AHLM0450-PA06-230X

Coding:

AHL:           Ankersmid Sampling, Heated Line

M:              Middle range temperature 30°C-120°C with auto-regulated heater

045:           Self-regulated ribbon 45W/m (=100°C @ 20°C ambient temperature)

0:              Fixed PTFE-tube

PA:             Outer PA-jacked corrugated and thermal fleece insulation

06:             Outside tube diameter 6mm

230:           Supply 230VAC

X:              No sensor = auto-regulation

Ankersmid M&C bvba,         Neerlandweg 21, B-2610 Wilrijk,        :  info@ankersmid-mc.be,  : (32) - 3/820 80 01,