Mercury MC-3000 Calibrator

MC 3000
FEATURES
Generates elemental mercury vapor
ca. 10 ... 500 µg/m3 Hg°
Compact sized and portable
No permeation principle - no need to calibrate the calibrator
Microprozessor controlled
Fields of application

The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.


Principle of Operation
An exactly adjustable carrier gas stream (normally air) is loaded with mercury in a first step. In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed in a special cell to get exactly saturation. The gas is then diluted, the dilution ratio is continuously adjustable that final concentrations within the specified range can be obtained.

Construction

The flow regulators and displays are mounted onto the front panel and are easily accessable. For mobile use the aluminium case has two carrying handles. The mercury containers are mounted inside of the case. The quantity of mercury is sufficient for the whole life time of the calibrator.

 

Operation

Using the MC-3000 is easy:
The device is placed on a flat surface and connected to the carrier gas source, for example a compressed air line. A portable air pump with a tank is delivered as an accessory. The MC-3000 is then switched on and the desired dilution ratio is selected according to a table which comes together with the calibrator. After waiting for about 30 minutes for stabilizing the saturation temperature is read from the display and the concentration is calculated from the table.


MC 3000 Technical Specifications
Concentrations revealed: ca. 10 ... 500 µg / m3 Hg°
Generated calibration gas flow: 1 ... 9 L / min, depending on conc.
Carrier gas: air
Carrier gas flow: max. 12,5 L / min
Carrier gas pressure: 1 ... 3bar (8 ... 25 psi)
Particulate filter: built-in: 0.2 µm
Mercury absorption filter: sulphurized activated carbon
Temperature sensors: Pt-100 with 1 / 10° accuracy
Flowmeter: electronic mass flow controller (MFC)
Connectors: for tubing 4mm i.d. / 6 mm o.d.
Power supply: 230 V / 50 Hz
Power consumption: max. 35 W
Dimensions: 305 x 480 x 430 mm (w x h x d)
Weight: ca. 6 kg
Accessories: air compressor / pressure regulator

MC-3000 in operation: calibration of a mercury analysis system.

 


As a leading supplier of high precision analytical equipment, we strive at all times to offer top quality solutions. Our products are manufactured according to the ISO 9001 quality regulations.
 

Ankersmid M&C bvba,         Neerlandweg 21, B-2610 Wilrijk,        :  info@ankersmid-mc.be,  : (32) - 3/820 80 01,